China OEM Cammpro Body Camera Manufacturers – DSJ-D8 Body Worn Camera – Senken
BRIEF INTRODUCTION:
FIND A DEALER
China OEM Cammpro Body Camera Manufacturers – DSJ-D8 Body Worn Camera – Senken Detail:
Features
★ Ambarella S5L Chipset
★ 14-nm low-power CMOS process
Main Advantages
1. Low power, long battery life
1) With 1080P FHD video recording, the power consumption is about 0.8 watts, which is half of the A7 solution and 1/4 of the MTK solution. With the same capacity battery, DSJ-D8 can work for much longer time.
2) 3mA standby current for 4G/LTE module, 25 hours standby for video streaming.
3) PWM charging technology can provide 2 Amp fast charging and avoid overheat which extends battery life significantly.
2. Low bit rate, high definition.
1) 1080P (1512P Max) high definition remote live video can present much more details than 720p video. Relying on the advanced video processor, it can provide you with crystal-like live video even in the suburbs and other areas with weak 4G signal.
3. Quick connecting, fast charging
1) GPS can get active position within 25 seconds in open space from cold-start. Shut down after positioning, the device can get position in several seconds after it’s powered on again within 2 hours.
2) 802.11AC WI-FI module can provide transmission speed over 100Mbps.
3) Improved LTE antenna provides better 4G signal and lower power consumption for remote live-viewing.
4) Boot up in 4s.
5) 3 hours fast charging with charging cradle (3500mAh battery, 2A power adaptor);
4. Better User Experience
1) Small size (83.2*54.8*29.8mm), light weight (145g).
2) IP68 waterproof level for mass production;
3) Qualified waterproof speaker provides continuous good sound quality even it has been dipped into water.
4) Better night vision effect is achieved by scattering glass to avoid flash light effect;
5) High video resolution up to 1512P (2688×1512) with affordable bitrate;
6) Customized logo can be burned into the record video;
7) DeWarp function to correct image distortion，HOV > 115 degree;
8) Wide working temperature from -30 to 60 degrees Celsius; 8 hours recording time can be reached at -30 degrees Celsius with normal battery.
9) Software and hardware design to ensure battery charging temperature not exceed the range of 0 to 45 degrees Celsius, to prevent charging lithium and battery bulging, to avoid battery life shortened or scrapped.
10) Body camera will keep communication with PC even being switched into U-Disk mode. Battery volume and charging status are still available for display when video files are uploading. PC can send commands to body camera to free the U-Disk or shut down itself. With this feature, PC can connect unlimited body cameras for data collection.
5. Artificial Intelligence (Face Recognition)
1) 4 core ARM Cortex A53 processors help implementing AI functions, for example, face recognition. It can support deep learning, faster and more accurate face recognition, and the face number can be up to 10,000 with local face database.
2) It can co-operate with cloud server for face recognition and comparison (under developing).
Product detail pictures:
Related Product Guide:
We not only will try our greatest to present fantastic expert services to each purchaser, but also are ready to receive any suggestion offered by our prospects for China OEM Cammpro Body Camera Manufacturers – DSJ-D8 Body Worn Camera – Senken , The product will supply to all over the world, such as: Madras, Miami, Manchester, Please feel cost-free to send us your specifications and we'll respond to you asap. We've got a professional engineering team to serve for the every single detailed needs. Free samples may be sent for you personally to know far more facts. So that you can meet your desires, please really feel cost-free to contact us. You could send us emails and call us straight. Additionally, we welcome visits to our factory from all over the world for much better recognizing of our corporation. nd merchandise. In our trade with merchants of several countries, we often adhere to the principle of equality and mutual advantage. It is our hope to market, by joint efforts, both trade and friendship to our mutual benefit. We look forward to getting your inquiries.
Q1: How to make order from your company?
A1: Please send inquiry message to email：export@senken.com.cn for any products details or solutions you need, we will contact with you for quotation on requested products, payment terms and shipping way ect.in details.
Q2:What’s the MOQ of your orders?
A2:Depending on different products, lightbars could be from one piece, for small headlights, MOQ usually starts from 50units. .
Q3:What certificates do your products have?
A3: We are supplying E-MARK, SAE, ROHS and NIJ certificate for different products based on different countries. For enterprise ceritificates, we have ISO9001, IS140000, ISO180000.
Q4:How long is the warranty on your products?
A4: We provide warranty terms based on different products, normally warranty period from one year to three years.
Q5:Do you accept sample orders?
A5: Yes, we accept sample orders for all our products, please contact us for further details.
Q6:Can you provide product customization services?
A6: Yes, we are supplying the products with customized and can provide the different solutions against customers demand.
Q7:What is the delivery time for normal orders?
A7: It will take us about 2 to 3 weeks for normal orders, for customized products, will consider the development process, normally 8 weeks most.
Q8: How to become your distributor or dealer?
A8: Please contact our sales representative for the details different regions:
Run@senken.com.cn for South East Asia
Sales01@senken.com.cn for Middle East and Ocean
Annie_wang@senken.com.cn for Europe and Africa
Thomas@senken.com.cn for North America and South America
By Arlene from US - 2017.02.14 13:19
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Riva from Guatemala - 2018.06.26 19:27
