SENKEN FBK-SK01-L Riot Control Helmet
The police riot control helmet is a specialized equipment designed to protect law enforcement officers from head and facial injuries or potential harm (such as corrosive chemical liquids) while carrying out their duties. The helmet shell is designed according to the standards set by the Ministry of Public Security for riot helmets and is manufactured using PC alloy, offering lightweight construction, high strength, appealing aesthetics, sleek lines, excellent light transmittance of the visor lens, wide field of view, comfortable fit, reliable performance, and easy on/off functionality. It serves as an indispensable protective gear for law enforcement personnel in their counter-terrorism and riot control operations to ensure their own safety.
FIND A DEALER
1.Standard: “GA 294-2012 Riot Control Helmet for Law Enforcement”
2.Material: The shell is made of engineering plastic, the cushioning layer is made of foam combined with soft energy-absorbing material, the visor is made of PC material with anti-fog treatment, and the helmet is made of non-toxic and harmless materials.
3.Structure: Consists of the shell, cushioning layer, padding, visor, wearing device (including straps, chin cup, fasteners, and helmet suspension system), and neck protector.
4.Appearance: The helmet’s outer surface has a uniform and smooth coating without defects such as impurities, bubbles, peeling, etc.
5.Markings: The helmet’s outer surface is affixed with markings. Facing the front emblem, the left side displays “POLICE” in English, and the right side displays “警察” in Chinese, using bold font. The material of the markings should be silver-white reflective film.
6.Front Emblem: The helmet has a front emblem that complies with the specifications of GA 270 in terms of design, size, and color.
7.Color: “99″ type police uniform navy blue.
8.Sizes: L, M, S.
10.Shell: The shell’s surface should be free from obvious dents, sharp edges, and other defects. The attachment of the visor to the shell should not exceed 15mm from the outer surface, and the attachment of other components like straps should not exceed 3mm from the inner or outer surface of the shell. There should be no burrs on the attachments. The shell of the riot control helmet should have a soft rounded edge. Sound transmission holes should be provided in the corresponding area of the shell near the ear.
11.Cushioning Layer: Should have the ability to absorb impact energy.
12.Padding: The padding should be sweat-absorbent, breathable, comfortable, and removable for washing.
13.Visor: The visor of the riot control helmet should be free from defects such as dents, sharp edges, burrs, bubbles, etc. It should be smooth and rounded without rough edges. During the opening and closing process, it should maintain its position without external force. The diameter of any small spots or black dots on the visor should be ≤1mm, and the quantity should be ≤4. The visor should have anti-fog performance.
14.Visor Light Transmittance: ≥85%.
15.Maximum Distortion of the Visor: ≥6′.
16.Wearing Device: The straps should be securely attached to the shell, and the width of the straps should be 20mm ± 2mm. The opening and closing function of the fasteners should be convenient and reliable, allowing for effective adjustment of the strap tightness. The straps should withstand a tensile load of 900N without tearing, breaking, detachment of connectors, or loosening of fasteners. The elongation of the straps should be less than or equal to 25mm, and the fasteners should function properly after unloading. The helmet suspension system should ensure ventilation and adjustability.
17.Neck Protector: The neck protector should be made of soft material and be detachable. It should be reliably connected to the shell and extend along the median plane outside the riot control helmet shell with an effective length of 120mm ± 20mm.
18.Leak Resistance: The riot control helmet should withstand the spraying of test liquid, and the test head mold should not be colored. When the visor is closed, the junction between the visor and the shell should prevent liquid from entering.
19.Impact Protection: The riot control helmet should withstand an impact of 4.9J kinetic energy on the visor. After the impact, the visor should not contact the nose of the test head mold, and the visor should be able to open and close normally.
20.Impact Resistance: The visor of the riot control helmet should withstand the impact of a 1g lead bullet at a velocity of 150m/s ± 10m/s. After the impact, the visor should not be penetrated or shattered.
21.Energy Absorption: The riot control helmet should withstand an impact energy of 49J, with the force transmitted to the test head mold being less than 4900N, and the shell should not crack.
22.Penetration Resistance: The riot control helmet should withstand a puncture with a capacity of 88.2J, and the hammer should not penetrate the helmet and make contact with the head mold.
23.Flame Resistance: ≤10s.
24.Climate Adaptability: -20°C ± 2°C to +55°C ± 2°C for 4 hours.
1. Instructions for Use:
(a) Users should choose the appropriate product size based on their head size.
(b) Lift the visor lens towards the top of the head, then use your fingers to pull the straps on both sides to expand the opening.
(c) Tilt the helmet forward, place the front of the head into the helmet, and pull it down to fully wear the helmet.
(d) After wearing the helmet, shake it from front to back and from side to side to ensure a comfortable fit. Adjust the straps to the appropriate position and buckle them securely. Then pull the visor lens down to make sure the waterproof strip on the visor seals tightly with the front of the shell.
(e) To remove the helmet, unbuckle the straps by pressing and pulling the buckle with your fingers to expand the opening, and then remove the helmet from front to back.
(a) The straps must be fastened securely during use.
(b) Before use, check that the waterproof rubber strip on the visor maintains a good seal with the front of the shell.
(c) Overall Strength: This helmet can withstand the impact energy and penetration impact of the GA294-2001 “Riot Control Helmet for Law Enforcement” standard 5.8 and 5.9. For impacts exceeding this level, it can provide maximum protection and reduce the harm to you. Therefore, if the helmet has experienced a significant impact accident, it should be immediately discontinued or sent to the factory for assessment to determine if it can continue to be used.
(d) Overall Appearance: When using the helmet, do not apply any corrosive solvents to clean oil stains on the shell, as it may damage the material strength of the helmet.
3. Maintenance and Care:
(a) Cleaning the interior of the helmet: After long-term use, dirt and odor may accumulate inside the helmet. In such cases, use appropriate deodorizers and desiccants to remove the odor and moisture.
(b) Maintenance of the helmet surface: The surface of the helmet is more prone to dirt. When there are stains on the helmet, use a damp cloth to clean the stains, and then rub with a car wax or polish to make the helmet clean and shiny. Helmet-specific polishes can also be used for better results.
(c) Maintenance of the visor: Since the visor is a transparent component, extra care should be taken when cleaning. When cleaning the visor, mix neutral detergent with water, wash it by hand, rinse thoroughly with tap water, and then dry it with a soft cotton cloth or tissue.
Q1: How to make order from your company?
A1: Please send inquiry message to email：firstname.lastname@example.org for any products details or solutions you need, we will contact with you for quotation on requested products, payment terms and shipping way ect.in details.
Q2:What’s the MOQ of your orders?
A2:Depending on different products, lightbars could be from one piece, for small headlights, MOQ usually starts from 50units. .
Q3:What certificates do your products have?
A3: We are supplying E-MARK, SAE, ROHS and NIJ certificate for different products based on different countries. For enterprise ceritificates, we have ISO9001, IS140000, ISO180000.
Q4:How long is the warranty on your products?
A4: We provide warranty terms based on different products, normally warranty period from one year to three years.
Q5:Do you accept sample orders?
A5: Yes, we accept sample orders for all our products, please contact us for further details.
Q6:Can you provide product customization services?
A6: Yes, we are supplying the products with customized and can provide the different solutions against customers demand.
Q7:What is the delivery time for normal orders?
A7: It will take us about 2 to 3 weeks for normal orders, for customized products, will consider the development process, normally 8 weeks most.
Q8: How to become your distributor or dealer?
A8: Please contact our sales representative for the details different regions:
Run@senken.com.cn for South East Asia
Sales01@senken.com.cn for Middle East and Ocean
Annie_wang@senken.com.cn for Europe and Africa
Thomas@senken.com.cn for North America and South America